Email Settings
Server type: POP3
Incoming mail server: | port:110
Outgoing mail server SMTP: port: 25 or port 587 (using authentication) | port: 587 (Using authentication)
Dial Up Connection
Dial up phone number: 80901606
Username: free
Password: free
Domain Name Server (DNS)
Primary DNS: /
Secondary DNS: /

Set Up Mail on Microsoft Outlook 2007 & 2010


  • Open Outlook 2007.
  • On the menu bar, click on Tools and select Account Settings.
  • The Account Settings window will open.
  • Click on the New icon.
  • In the Add New E-mail Account window, select the “Microsoft Exchange, POP3, IMAP, or HTTP” option and then click the Next button.
  • In the Auto Account Setup window, place a checkmark in the box next to the option: Manually configure server settings or additional server types.
  • Click on the Next button.
  • In the Choose E-mail Service window, select the first option, Internet E-mail.
  • Click the Next button.
  • Enter your e-mail address in the E-mail Address field.
  • In the Incoming Mail Server (POP3) field, enter ““.
  • In the Outgoing Mail Server (SMTP) field, enter ““. NOTE: If you are using an ISP other than Logosnet you must contact your Internet Service Provider to obtain the appropriate SMTP settings.
  • Enter the account username in the User Name field and your account password in the Password field.
  • Put a checkmark in the Remember Password box.
  • Click the Next button in the E-mail Accounts window.
  • Click the Finish button to complete the Account Wizard.
  • You should now be able to receive e-mail with Outlook.

    Setup POP3 account on Outlook Express

Remote Assistance with TeamViewer


  • Go to
  • Download the software on your computer
  • After it get downloaded on your computer
  • Double-click and open (run) that file
  • Select Run
  • Click on Next > button
  • Select I accept the terms of the License Agreement
  • Click on Next > button
  • Now you can use your TeamViewer.

Remote Assistance with Ammyy


  • Go to
  • Download the software on your computer
  • After it get downloaded on your computer
  • Double-click and open (run) that file
  • Now you can use AMMYY Admin.

Connect and log in to your router

  • Open your web browser (This could be Internet Explorer, Safari, Chrome or Firefox, depending on your system).
  • Ignore the web page (or error message) that appears and enter the IP address of your router. This should be192.168.1.254 for Bitstream or for Home ADSL.


  • If you’re asked to log in, enter the Router Username cytadsl and Password cytaspeed.
  • Click Home Network on the left menu.


  • You’ll see a basic diagram showing the devices currently connected to your network. Click WLAN: CytaSSID (where CytaSSID is the name of your wireless network).

change_thosmon_speedstouch_wifi_password Now you’ll see an overview of the settings currently being used.

  • To change the settings click Configure

change_thosmon_speedstouch_wifi_password In the Configuration section:

  • Interface Enabled: select to enable
  • Network name (SSID): this is the name your computer will see when searching for wireless networks
  • Encryption: select your preferred option from:
  • Use WEP Encryption: Poor security NOT RECOMMENDED
  • (Passwords needs to be 10 characters in the range: 0-9 and A-F)
  • Use WPA-PSK Encryption: Recommended
  • (Password needs to be 8 or more characters A-Z, 0-9):
  • Note: Changing the encryption type will alter the KEY fields to those appropriate to the encryption type.
  • Input a suitable security key for the encryption type into the appropriate fields
  • When you have finished click Apply

You might need to reconnect to your network after changing some of these settings (particularly the Network Name,Encryption or Encryption password). See our Wireless connection guide if you need help with this.


© 2021 Logosnet Services Ltd. All Rights Reserved
WordPress and WHMCS integration by i-Plugins